claw-daemon/clawd
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
123 Commits 2 Branches 0 Tags
3d2e5d477ac6f1f6d4feac4102ee98fe096d1c0d
Commit Graph
100 Commits
This Branch
This Branch
All Branches
Author SHA1 Message Date
stswangzhiping 3d2e5d477a revert: restore TCP 7000 frpc config (WebSocket via Nginx not working) 
Made-with: Cursor
 2026-04-09 17:40:14 +08:00
stswangzhiping d9f826f978 feat: frpc uses WebSocket over port 443 for firewall compatibility 
Made-with: Cursor
 2026-04-09 17:15:44 +08:00
stswangzhiping c1c51843c4 fix: remove redundant subtitle, update wifi label on setup page 
Made-with: Cursor
 2026-04-07 18:07:09 +08:00
stswangzhiping 43deb9afa0 fix: ttyd 改用 apt install，不再从 GitHub 下载 
- install.sh: 改为 apt install -y ttyd，删除 GitHub 下载逻辑
- frpc.js: TTYD_BIN 改为 findTtydBin() 动态查找系统路径，删除 downloadTtyd()

Made-with: Cursor
 2026-04-06 15:17:27 +08:00
stswangzhiping f6afcd5cc2 refactor: 移除 restartGateway，openclaw.json 单次写入 
gateway 自动检测文件变更并重启，clawd 无需主动 kill。
同时去掉 applyFullProviderFromVps 的预清理写盘，
改为拉完模型后一次性写入，避免 gateway 读到中间状态。

Made-with: Cursor
 2026-04-05 09:12:57 +08:00
stswangzhiping 4852ded7e5 fix: clawd 不再写 agents/main/agent/auth-profiles.json 
clawd 以 root 身份运行，写该目录会导致 gateway（sts 用户）的 agents 目录被 root 创建。
clawd 只需修改 openclaw.json，gateway 重启后会自行读取，无需操作 gateway 内部目录。

Made-with: Cursor
 2026-04-04 21:33:35 +08:00
stswangzhiping 3fe5586613 feat: install.sh 预装 ttyd，frpc.js 去掉运行时下载 
install.sh:
- 移除系统自带 ttyd 包（避免与 clawd 托管的 ttyd 端口冲突）
- 安装阶段下载 ttyd 1.7.7 到 /etc/clawd/ttyd，自动检测 arch
- 下载失败时给出提示和手动下载地址

frpc.js:
- startTtyd() 不再尝试运行时下载，binary 不存在时报错提示重跑 install.sh
- pkill 改为杀所有 ttyd 进程（pkill -x ttyd），不限路径，
  避免系统自带 ttyd 占用 7681 端口导致 clawd 的 ttyd 启动失败

Made-with: Cursor
 2026-04-04 18:16:07 +08:00
stswangzhiping 46dae37079 feat: 启动和连接时设置 hostname 为 claw-<claw_id> 
- start(): 有 claw_id 时立即设置（重启恢复）
- _onConnected(): 每次连上 VPS 后设置（首次注册或重连确认）
- 用 exec 异步执行，不阻塞启动流程

Made-with: Cursor
 2026-04-03 22:58:14 +08:00
stswangzhiping fb8a408f93 fix(led): VFD 管道用 O_NONBLOCK 防止事件循环阻塞 
FIFO 写入改为 O_WRONLY | O_NONBLOCK：
- 无读端（vfdservice 关闭读端后）openSync 立即抛 ENXIO 而非永久阻塞
- showPin blink timer 每 500-1000ms 自动重试，vfdservice 恢复读后
  即可成功显示 PIN，彻底解决"长时间激活后解绑 PIN 不闪"问题

同时移除 66b94d8 加的 showTime keepalive：
- keepalive 用的也是阻塞 openSync，vfdservice 关闭读端时反而会
  在 setTimeout 回调里阻塞整个事件循环，比不加更危险

Made-with: Cursor
 2026-04-03 19:01:14 +08:00
stswangzhiping 66b94d828f fix: 还原 inactive 路径 restartGateway + showTime keepalive 
1. 还原 7737e08：removeProviderByName 重新调用 restartGateway()，
   inactive/active 状态变化均重启 gateway 使 openclaw.json 生效

2. led.js showTime() 加 30s keepalive 定时器：持续向 vfdservice
   管道写入，防止长时间无写入后管道"冷却"，导致随后 showPin()
   调用 openSync(FIFO, 'w') 因无读端而阻塞、blink timer 无法触发

Made-with: Cursor
 2026-04-03 18:40:08 +08:00
stswangzhiping 7737e08464 fix: inactive 路径不重启 gateway，修复 PIN 不闪问题 
removeProviderByName 中移除 restartGateway() 调用。

原因：inactive 时 kill openclaw-gateway 会破坏 vfdservice
（gateway 的子进程或共享 VFD 管道的进程），导致后续 showPin
写管道失败或被 gateway 重启后的时钟命令覆盖，数码管无法显示
PIN 闪烁。

inactive 期间设备 frp 隧道已断开，无人访问 gateway，无需立即
重启。下次 active 时 applyFullProviderFromVps 会写完整 provider
config 并重启 gateway。

Made-with: Cursor
 2026-04-03 18:20:09 +08:00
stswangzhiping c28bf53217 fix: WS 多次失败时统一显示 AP，移除 Err0 分支 
WS 失败 ≥ 3 次无论是否有网络均显示 showAP，
不再区分"有网但 VPS 不可达"时显示 showErr0。

Made-with: Cursor
 2026-04-03 16:06:34 +08:00
stswangzhiping f4efb13612 fix: restartGateway 改异步，修复 inactive 时 PIN 不闪问题 
原来 removeProviderByName 内用 execSync 调 pkill，在 showPin 前
阻塞事件循环约 100ms+；若 vfdservice 是 gateway 子进程则管道无
读端，导致 showPin 写入失败或 blink setTimeout 无法触发。

改为 exec（异步）：pkill 在后台执行，不阻塞事件循环，LED/VFD
操作（showPin blink）可正常调度。

Made-with: Cursor
 2026-04-03 11:41:59 +08:00
stswangzhiping 7c9a6e913e fix: 确保 origin 更新后再重启 gateway 
active+full provider 路径：
  addProviderSync → onDone(写 origin) → restartGateway 一次
之前顺序错误导致 gateway 用旧 origin 重启后再重启一次。

_updateOpenClawOrigin 只负责写盘，不再调 pkill。
移除 client.js 中已无用的 execSync 引入。

Made-with: Cursor
 2026-04-03 10:53:05 +08:00
stswangzhiping 701251f19b fix: 写盘 openclaw.json 后自动重启 gateway 
- openclaw-provider.js: 新增 restartGateway()，在 removeProviderByName
  和 applyFullProviderFromVps 写盘成功后均调用，确保 inactive/active
  两路都能触发重启
- client.js: _updateOpenClawOrigin 去掉 CLAWD_OPENCLAW_GATEWAY_PKILL
  env var 门控，origin 变更后默认重启

Made-with: Cursor
 2026-04-03 10:50:29 +08:00
stswangzhiping 12aedaaf85 feat(net): late uplink poll + faster provision monitor (15s) 
- client: while !_connectionStarted, poll every 3s for hasInternet or
  hasWiredInternetProbe (e.g. Ethernet after AP); start _proceedWithConnection
  once; clear poll on network-ready/stop. Avoids provision-level emit spam.
- provisioning: MONITOR_INTERVAL_MS 30s -> 15s for quicker WiFi/AP UI.

Made-with: Cursor
 2026-04-02 12:40:41 +08:00
stswangzhiping fe62b9febe Revert "fix(provision): emit network-ready when AP mode gains internet (e.g. Ethernet)" 
This reverts commit af03410528.
 2026-04-02 12:07:40 +08:00
stswangzhiping af03410528 fix(provision): emit network-ready when AP mode gains internet (e.g. Ethernet) 
Monitor previously only closed AP on external WiFi STA; late wired uplink
while in AP never fired network-ready, so WS stayed down and AP display
kept flashing. Poll hasInternet() in AP state and call _emitNetworkReady().

Made-with: Cursor
 2026-04-02 11:44:05 +08:00
stswangzhiping 389b2b09ae fix(openclaw): seed gateway.controlUi when no claw.cutos.ai URL in config 
If openclaw.json has no https://*.claw.cutos.ai string, set controlUi
allowedOrigins (loopback + newOrigin), allowInsecureAuth, and
dangerouslyDisableDeviceAuth so factory images need no manual edit.
Otherwise keep replaceOriginStrings behavior.

Made-with: Cursor
 2026-04-01 17:42:32 +08:00
stswangzhiping 4cfdaa46e5 feat: apply VPS provider to OpenClaw on status_update (fetch models, merge config) 
- Add openclaw-provider: fetch /v1/models, merge provider/auth, remove by name
- Wire client _applyStatus: inactive removes provider; active applies full provider then origin
- Single-flight _busy to ignore concurrent apply/remove; isFullProvider uses base-url key

Made-with: Cursor
 2026-03-31 14:32:50 +08:00
stswangzhiping 5a56e0015c chore(openclaw): skip gateway pkill by default; opt-in CLAWD_OPENCLAW_GATEWAY_PKILL=1 2026-03-31 14:09:10 +08:00
stswangzhiping fcee9ca709 fix(led): blink AP on VFD like Conn/PIN for provisioning visibility 2026-03-29 13:49:48 +08:00
stswangzhiping 23afd24f4d feat(led): drive VFD digits via vfdservice pipe (TITLE/CLOCK), keep display API 2026-03-29 13:40:56 +08:00
stswangzhiping a6e2f7ab8f fix(client): default off BtMonitor unless CLAWD_ENABLE_BT (no env line needed) 2026-03-29 08:20:08 +08:00
stswangzhiping aa9561f946 chore(install): default CLAWD_DISABLE_BT=1 in new env file template 2026-03-29 08:18:34 +08:00
stswangzhiping b25bc58a3b fix(client): honor CLAWD_DISABLE_BT and skip BtMonitor without hci 2026-03-29 08:16:13 +08:00
stswangzhiping e3e9580e46 fix(network): async connectWifi so systemd watchdog can fire during nmcli wait 2026-03-29 08:14:24 +08:00
stswangzhiping 4c16483ee7 fix(network): robust AP->STA connect (nmcli argv, device show state, wifi iface for DNS) 2026-03-29 07:46:22 +08:00
stswangzhiping 012ad90335 fix(provision): treat WiFi join success by STA state, not internet ping 2026-03-29 07:10:43 +08:00
stswangzhiping 2ec02d71bb fix(client): start LAN carrier polling (led.lan was never started) 2026-03-28 22:53:11 +08:00
stswangzhiping f7c462220e fix(led): map LAN to play icon and WiFi status to wifi+eth pair 2026-03-28 22:39:26 +08:00
stswangzhiping ea502fc26a refactor(network): unify sysfs carrier reads and LAN vs wired iface logic 2026-03-28 22:33:29 +08:00
stswangzhiping 1910a2fb9f fix(led,provision): AP forces WiFi(play) off; LAN uses carrier+operstate 
- Monitor: every tick in ap state led.off() so play never stays on with hotspot
- hasLanCableCarrier: _ifacePhysicalLinkUp (carrier=1 and operstate not down)
- When end0/eth0 exist but link down, return false (no fallback to hasWiredCarrier)
- LAN poll 500ms

Made-with: Cursor
 2026-03-28 22:15:48 +08:00
stswangzhiping 9800e712e5 fix(network): LAN LED use end0/eth0 carrier only, decouple from WiFi 
hasLanCableCarrier no longer locks first scanned iface (NM/WiFi could change
which iface had carrier). Prefer sysfs end0 then eth0 each poll; fallback
hasWiredCarrier only if neither exists.

Made-with: Cursor
 2026-03-28 22:07:20 +08:00
stswangzhiping 23a1f8aad8 docs(install): CLAWD_ETH_IFACE optional with auto LAN iface cache 
Made-with: Cursor
 2026-03-28 21:53:44 +08:00
stswangzhiping a186857126 fix(network): auto-cache LAN iface for carrier when CLAWD_ETH_IFACE unset 
First getWiredIfaceWithCarrier() result locks _lanMonitoredIface; subsequent
hasLanCableCarrier only reads that sysfs carrier so unplug reliably turns LAN off.
CLAWD_ETH_IFACE still overrides.

Made-with: Cursor
 2026-03-28 21:53:21 +08:00
stswangzhiping 8f5a8ec896 fix(led): swap WiFi(play)/LAN(wifi+eth), LAN carrier via CLAWD_ETH_IFACE, faster alarm 
- WifiLed drives play; LanLed drives wifi+eth pair (matches panel silkscreen)
- hasLanCableCarrier(): CLAWD_ETH_IFACE-only carrier when set (reliable unplug)
- LAN poll 1s; config.activated persisted for immediate setApps on boot/reconnect
- setApps double vfdOn alarm after 50ms for slow OpenVFD
- Clear activated + setSetup on credential errors
- install.sh env comment for CLAWD_ETH_IFACE

Made-with: Cursor
 2026-03-28 21:50:56 +08:00
stswangzhiping 347b19a0c9 feat(led): OpenVFD sysfs (wifi+eth, alarm, play/lan), skip BT without hci 
- Write /sys/class/leds/openvfd led_on/led_off (CLAWD_OPENVFD_PATH)
- WiFi product LED: wifi+eth together; SETUP/APPS -> alarm off/on
- LanLed polls hasWiredCarrier -> play; export led.lan, start/stop from client
- BT monitor only if CLAWD_DISABLE_BT unset and hci* exists (RK3528)
- Display strings remain debug-only (数码管暂不驱动)
- install.sh env template: CLAWD_DISABLE_BT, CLAWD_OPENVFD_PATH comments

Made-with: Cursor
 2026-03-28 21:35:38 +08:00
stswangzhiping abd123b3dd fix(client): remove AP net monitor WS terminate (scheme A) 
AP mode no longer periodically terminates WebSocket when hasInternet and
hasWiredInternetProbe both fail; avoids false positives with hotspot + wired
uplink. Reconnect and offline detection rely on Pong, peer close, and TCP.

_connect() still defers new WS when AP and no uplink; close handler UI unchanged.

Made-with: Cursor
 2026-03-28 17:18:36 +08:00
stswangzhiping 06d06fdd1e fix(systemd): use systemd-notify + NotifyAccess=all for watchdog 
unix_dgram to NOTIFY_SOCKET failed on rk3528 (embedded Node), so WATCHDOG=1 never
reached systemd despite WATCHDOG_USEC fallback. Switch to exec systemd-notify with
NOTIFY_SOCKET in child env; unit sets NotifyAccess=all so cgroup may notify.

Users must reload unit (re-run install.sh or add NotifyAccess=all manually).

Made-with: Cursor
 2026-03-28 14:54:56 +08:00
stswangzhiping fdc1e9fbd3 fix(systemd): pet watchdog when WATCHDOG_USEC missing; StartLimitInterval for old systemd 
Embedded units may set WatchdogSec but omit WATCHDOG_USEC; SD_NOTIFY_INTERVAL was 0 so no
WATCHDOG=1 was sent and systemd killed the main process after ~60s.

Replace StartLimitIntervalSec with StartLimitInterval= for older systemd (journal warning).

Made-with: Cursor
 2026-03-28 14:49:07 +08:00
stswangzhiping 04dd1017bb fix(network): wired ping probe, AP/WS and systemd notify hardening 
- Add hasWiredInternetProbe and export; AP mode uses it with hasInternet
- systemd-env: strip NOTIFY_SOCKET from env early; client uses unix_dgram
- Strip NOTIFY_SOCKET from frpc/ttyd spawn env in watchdog and frpc
- WS: pong miss debounce; AP net monitor consecutive-fail debounce

Made-with: Cursor
 2026-03-28 14:37:56 +08:00
stswangzhiping 402440aadc refactor(led): drop openvfd sysfs writes, log [vfd] at debug 
- WiFi/BT/status/display: no fs/tee; preserve info-level state messages
- install: remove ExecStartPre openvfd init

Made-with: Cursor
 2026-03-27 16:31:17 +08:00
stswangzhiping 6ad573e272 Revert "fix(openclaw): always set gateway.origin when updating claw subdomain" 
This reverts commit 69ac075e8c.
 2026-03-27 14:42:53 +08:00
stswangzhiping 69ac075e8c fix(openclaw): always set gateway.origin when updating claw subdomain 
- Regex-only replace missed empty/new JSON without existing *.claw.cutos.ai URL
- Also replace wss://*.claw.cutos.ai in string fields

Made-with: Cursor
 2026-03-27 14:42:05 +08:00
stswangzhiping 12366790d2 fix(network): auto-detect wired iface and ping via -I for hasInternet 
- Scan sysfs for carrier when CLAWD_ETH_IFACE unset (end0/enp* etc.)
- Explicit CLAWD_ETH_IFACE still pins a single interface
- Ping fallback uses -I wired iface when default route fails (e.g. AP on wlan)
- Exclude can/docker/veth/wl* and similar from auto scan
- Clarify client log when waiting for WAN

Made-with: Cursor
 2026-03-27 14:30:23 +08:00
stswangzhiping 88283ad6b6 chore(tools): box-install-from-tar runs bundled install.sh (no curl/CDN) 
Made-with: Cursor
 2026-03-27 14:02:34 +08:00
stswangzhiping 7823edc7b3 fix(install): skip git/tarball when package.json already present (offline BOX) 
Made-with: Cursor
 2026-03-27 13:59:54 +08:00
stswangzhiping 884b0dc50a feat(openclaw): persist config as ~/.openclaw/openclaw.json 
- Read gateway token/port via JSON.parse (same structure as former YAML)
- Update claw.cutos.ai origin by replacing URLs in JSON string fields
- Export resolveOpenclawConfigFile() for frpc + client
- Drop js-yaml dependency
- install: ExecStartPre touches openvfd only if nodes exist (3528-friendly)
- Add tools/deploy-rsync.sh for syncing /opt/clawd over SSH

Made-with: Cursor
 2026-03-27 13:49:23 +08:00
stswangzhiping 85026cdf47 docs: add repo paths and module overview table to README 
Made-with: Cursor
 2026-03-27 10:16:18 +08:00
stswangzhiping 837cb8865f feat: BtMonitor 监控 bluetoothctl 状态驱动 BT 指示灯 
新增 lib/bt-monitor.js：
- 每 3 秒轮询 bluetoothctl show + hcitool con
- connected（ACL 连接存在）→ 常亮
- scanning/connecting（Discovering: yes）→ 闪烁
- 无 adapter / Powered: no / 静止 → 熄灭

client.js：启动时开启 BtMonitor，stop() 时清理
provisioning.js：移除所有 led.bt 调用，BT 灯统一由 BtMonitor 管理

Made-with: Cursor
 2026-03-24 23:14:02 +08:00
stswangzhiping dcc20e2cad fix: BT 灯仅在搜索热点和连接热点时闪烁 
等待 NM 自动重连已保存 WiFi 不属于 BLE 搜索/连接阶段，
该阶段 BT 灯保持熄灭，不再闪烁。

Made-with: Cursor
 2026-03-24 23:00:07 +08:00
stswangzhiping 37e93c66eb feat: 添加蓝牙指示灯（b6）控制 
led.js: 新增 BtLed 类，路径 /sys/devices/platform/openvfd/attr/b6
  - blink() AP 配网进行中
  - on()    配网成功 / WiFi 已连接
  - off()   蓝牙不工作 / 初始/停止状态

provisioning.js: 各配网状态同步驱动 BT 灯
  - AP 模式 / 等待自动重连 → 闪烁
  - WiFi 连接成功 → 常亮
  - stop() → 熄灭

Made-with: Cursor
 2026-03-24 22:58:10 +08:00
stswangzhiping 935d5ba176 fix: 用 js-yaml 正确解析 config.yaml 获取 dashboard token 
替换正则提取方式，使用 js-yaml 解析 YAML 文件，
通过 config.gateway.auth.token 和 config.gateway.port 读取字段。

Made-with: Cursor
 2026-03-24 17:00:33 +08:00
stswangzhiping cdb2ddc688 fix: getDashboardInfo 改为读取 config.yaml 
openclaw 配置文件路径从 openclaw.json 迁移到
config/config.yaml，用正则提取 token 和 port 字段。

Made-with: Cursor
 2026-03-24 16:47:35 +08:00
stswangzhiping 7c03a59c57 refactor: 重构 OpenClaw config.yaml 更新逻辑 
- _configureOpenClaw 改名为 _updateOpenClawOrigin(targetId)
- active 时传真实 claw_id，inactive 时传 '0000'
- 每次 _applyStatus（含 status_update）都调用，文件无变化则幂等跳过
- 有变化时 pkill -9 -x openclaw-gateway，不再依赖 openclaw CLI 或 systemctl --user
- 移除 _openClawConfigured 标志位

Made-with: Cursor
 2026-03-24 16:22:05 +08:00
stswangzhiping 4a1a2de300 fix: only run configureOpenClaw once per clawId, not on every WS reconnect 
Made-with: Cursor
 2026-03-24 14:31:31 +08:00
stswangzhiping 029f7fe0a9 fix: edit openclaw config.yaml directly and restart as sts user 
Made-with: Cursor
 2026-03-24 14:07:22 +08:00
stswangzhiping 1a63e90055 fix: use full path to find openclaw binary for root service 
Made-with: Cursor
 2026-03-24 13:13:00 +08:00
stswangzhiping cefbab28b7 feat: configure openclaw allowedOrigins on activation 
Made-with: Cursor
 2026-03-24 11:38:58 +08:00
stswangzhiping ffa13b7c81 fix: captive portal 改用 IP 地址 10.42.0.1 替代域名 
Made-with: Cursor
 2026-03-22 08:04:20 +08:00
stswangzhiping 4716cc9820 fix: replace unstable disk serial with wired MAC for hardware fingerprint 
Made-with: Cursor
 2026-03-22 07:38:05 +08:00
stswangzhiping 86859a5e0d fix: 过滤AP热点IP，改用checkip.amazonaws.com获取外网IP，新增ipplus360地理位置 
Made-with: Cursor
 2026-03-21 09:20:00 +08:00
stswangzhiping 878f3592bf feat: connect 消息上报 local_ip 和 external_ip 
Made-with: Cursor
 2026-03-21 08:18:27 +08:00
stswangzhiping af5248f2a6 fix: emit network-ready immediately when wired internet available, setup AP async 
Made-with: Cursor
 2026-03-20 08:41:39 +08:00
stswangzhiping 108bea4ed7 fix: use fixed 5s retry on cert-not-yet-valid to avoid 70s exponential backoff before NTP sync 
Made-with: Cursor
 2026-03-20 08:34:53 +08:00
stswangzhiping d3bd5ca3e7 fix: replace network-online.target with NetworkManager.service to avoid 60s+ startup delay 
Made-with: Cursor
 2026-03-20 08:28:55 +08:00
stswangzhiping e94e2bb10c fix: add AP net monitor to detect cable unplug within 5s, reduce ping interval to 10s 
Made-with: Cursor
 2026-03-20 08:14:31 +08:00
stswangzhiping 5ba8b7bffa fix: fast-path hasInternet() via carrier check to avoid nmcli cache delay 
Made-with: Cursor
 2026-03-20 08:00:25 +08:00
stswangzhiping 08fa4eefaa feat: skip WS in AP+no-internet, poll every 5s until network available 
Made-with: Cursor
 2026-03-20 07:43:51 +08:00
stswangzhiping c13ed3ba6d fix(vfd): use isApMode() instead of hasInternet() to decide AP vs Err0 
Made-with: Cursor
 2026-03-19 23:45:16 +08:00
stswangzhiping 8f158eeeb2 fix: turn off LEDs on service start, suppress Err0 before first WS success 
Made-with: Cursor
 2026-03-19 23:27:42 +08:00
stswangzhiping 9b4287db1d feat(vfd): showConn blink on WS connecting, showErr0 on VPS unreachable 
Made-with: Cursor
 2026-03-19 23:17:08 +08:00
stswangzhiping 53b9804c72 feat(led): showErr(code) + WS fail>=3 shows ERRa or AP on VFD 
Made-with: Cursor
 2026-03-19 22:44:56 +08:00
stswangzhiping e36bec8660 refactor(led): startup all-off, AP shows VFD, WS close no VFD change 
Made-with: Cursor
 2026-03-19 22:08:47 +08:00
stswangzhiping d68d673cdc perf(heartbeat): 10s interval, collect metrics every 3rd beat (30s) 
Made-with: Cursor
 2026-03-19 09:58:48 +08:00
stswangzhiping 5824cf089a feat(ws): unified status_update handler, extract _applyStatus() 
Made-with: Cursor
 2026-03-19 09:43:29 +08:00
stswangzhiping 16f82d6ab8 feat(ws): handle activated message from server, switch to APPS+time 
Made-with: Cursor
 2026-03-19 09:24:10 +08:00
stswangzhiping fba9d401c2 feat(display): PIN 显示时加闪烁效果（亮1s灭0.5s） 
Made-with: Cursor
 2026-03-19 09:13:07 +08:00
stswangzhiping b4fa850445 feat(display): PIN 改为 4 位，showPinMiddle4 → showPin 
Made-with: Cursor
 2026-03-19 08:57:44 +08:00
stswangzhiping ce7f9f028e fix(display): 改用 #m2 模式显示 PIN 数字，修复 #m3 不支持数字导致的显示错误 
Made-with: Cursor
 2026-03-19 08:52:52 +08:00
stswangzhiping 33046948b9 fix(display): 用 printf 代替 echo，修复 VFD 写入失败及数字显示偏移问题 
Made-with: Cursor
 2026-03-19 08:37:00 +08:00
stswangzhiping e887f5b8e2 fix(display): 不在 ws.open 时 showTime，避免覆盖未激活时的 PIN 显示 
Made-with: Cursor
 2026-03-19 07:44:28 +08:00
stswangzhiping 57c0a1b6f8 feat(display): 未激活+连网时 VFD 显示 PIN 码中间4位 
Made-with: Cursor
 2026-03-19 07:37:57 +08:00
stswangzhiping cf2973946f fix(captive): 密码默认隐藏，眼睛图标初始为半透明 
Made-with: Cursor
 2026-03-18 21:54:40 +08:00
stswangzhiping 7d3477454c feat(captive): 密码框增加眼睛图标切换可见性 
Made-with: Cursor
 2026-03-18 21:35:28 +08:00
stswangzhiping 9e7dcada05 feat(captive): 将WiFi 网络改为请选择下列WiFi 网络 
Made-with: Cursor
 2026-03-18 21:26:58 +08:00
stswangzhiping 959a2b67f2 refactor(display): tie VFD display to WS connection state only 
Made-with: Cursor
 2026-03-18 21:17:36 +08:00
stswangzhiping a737101c2e fix(display): use execSync shell pipe instead of fs.writeFileSync to avoid EINVAL 
Made-with: Cursor
 2026-03-18 21:11:22 +08:00
stswangzhiping 9da4cd0aa1 feat: VFD display shows AP when disconnected, time when connected 
Made-with: Cursor
 2026-03-18 21:10:14 +08:00
stswangzhiping a0f767f267 fix(led): swap SETUP/APPS paths, WiFi LED off in AP mode 
Made-with: Cursor
 2026-03-18 20:56:49 +08:00
stswangzhiping 90bba5f348 feat: add SETUP/APPS status LEDs (b2/b1), toggle on activation 
Made-with: Cursor
 2026-03-18 20:25:54 +08:00
stswangzhiping 06b670d5ec docs: add update instructions using /opt/clawd 
Made-with: Cursor
 2026-03-18 20:09:44 +08:00
stswangzhiping b95e909d48 fix(led): use log.info for LED state, show write errors and hasInternet failures 
Made-with: Cursor
 2026-03-18 20:07:31 +08:00
stswangzhiping 875e69a454 feat: add WiFi LED indicator (openvfd b5) 
Made-with: Cursor
 2026-03-18 19:47:20 +08:00
stswangzhiping d66558c9de fix: read dashboard token from ~/.openclaw/openclaw.json instead of running openclaw dashboard command 
Made-with: Cursor
 2026-03-18 14:00:57 +08:00
stswangzhiping 5f5b976f5b fix: split su command into separate args for ttyd 
Made-with: Cursor
 2026-03-16 16:21:11 +08:00
stswangzhiping 9dc559a43a fix: run ttyd shell as normal user (sts) instead of root 
Made-with: Cursor
 2026-03-16 16:15:13 +08:00
stswangzhiping 17d0711f67 ui: redesign WiFi list with signal bars and cleaner layout 
- Replace <select> with scrollable list of clickable items
- Show signal strength as 4-bar icon instead of percentage text
- Remove security info from parentheses, show lock icon only
- Smaller font size for compact mobile display

Made-with: Cursor
 2026-03-16 13:11:23 +08:00
stswangzhiping c6f55c8c15 fix: pre-scan WiFi before entering AP mode 
wlan0 cannot scan while in AP mode (hardware limitation).
Now scan nearby networks before starting hotspot and cache
the results for the captive portal page.

Made-with: Cursor
 2026-03-16 13:04:00 +08:00